• FSC Certified Natural Oak
  • A4Plus FSC Certified Natural Oak Frame with Mount

Sprayed White Tulip 30x40cm Glazed Frame with Mount - FSC® certified

Tax included

Superior Quality "hand-finished" White frame

FSC® (Forest Stewardship Council®) certified - guaranteed responsibly sourced.
Complete with glass and fittings

Print & Fit option available
Mount available (aperture fits 200x300mm)

Ready Made Frames

About this Frame

The 300x400mm Size is a common standard size for Picture Frames.  It will accommodate a 300x400mm print, photograph, certificate, document or artwork..

This frame is made from Forest Stewardship Council® (FSC®) certified Tulip wood (Liriodendrun Tulipifera) from North America. The moulding is 21mm wide and 21mm deep.

The frame is sprayed with two undercoats and then two coats of white satin lacquer top coat. The result is a beautiful flat satin sheen finish with no corners showing.

The Under-Mount is Plain Off-White and is made from 1.45mm thick FSC certified board which Conforms to the Fine Art Trade Guild’s “Conservation” Standard.

The Frame is Glazed with 2mm Float Glass. The backboard is 3mm FSC certified MDF held in with Flexi-tabs. D-Rings, Screws and Picture Cord are supplied.

Available Extras


The Mount Aperture is 200mm x 300mm. Please ensure that the Mount is able to overlap the paper by 5mm on all sides. The mount margins are 50mm all round of which approx. 45mm is visible, with the remainder going under the rebate.

The Mount is Lightly Textured Off-White (colour 8065). It is made from 1.45mm thick FSC certified board which Conforms to the Fine Art Trade Guild’s “Conservation” Standard.

Print & Fit:

If you choose this option, we will ask you to supply a digital image file of sufficient quality (minimum 1400px x2100px) to print at 200x300mm- once you have an order number, you will be able to send it by email, dropbox, wetransfer etc..

We will then print this image out on Canon Semi Gloss 240gsm. FSC® Certified Photo-Paper, using our state of the art Canon imagePROGRAF iPF8400 printer with it’s LUCIA EX 12 Colour Pigment Ink system. Once printed, we bond the printed image to the undermount to prevent any possibility of wrinkling.

After fitting your image into the frame, we seal the back of the frame with brown gum tape and fit the hangings and cord. The finished picture will arrive with you (or whoever you send it to) professionally finished and ready to hang on the wall.  


Specific References

New product