Sprayed White A3 Plus Glazed Frame with Mount - FSC® certified
Superior Quality "hand-finished" White frame.
Mount Aperture Fits A3 (287 x 410mm)
FSC® (Forest Stewardship Council®) certified - guaranteed responsibly sourced.
Complete with glass and fittings
Print & Fit option available
About this Frame
The A3 Plus Size is unique to Pictureframes.uk - designed specifically to accomodate an A3 print, photograph, certificate, document or artwork with a Mount.
This frame is made from Forest Stewardship Council® (FSC®) certified Tulip wood (Liriodendrun Tulipifera) from North America. The moulding is 21mm wide and 21mm deep.
The frame is sprayed with two undercoats and then two coats of white satin lacquer top coat. The result is a beautiful flat satin sheen finish with no corners showing.
The code for custom frames in this moulding is 04T_FC2_WHITE. If you set up the online framing studio, you can then use the Preview tab to see how your own image will look in this frame.
The Mount Aperture is 287mm x 410mm, allowing the Mount to overlap the paper by 5mm on all sides. The mount margins are 50mm all round of which approx. 45mm is visible, with the remainder going under the rebate.
The Mount is Lightly Textured Off-White (colour 8065). It is made from 1.45mm thick FSC certified board which Conforms to the Fine Art Trade Guild’s “Conservation” Standard.
The Under-Mount Plain Off-White and is also made from 1.45mm thick FSC certified board which Conforms to the Fine Art Trade Guild’s “Conservation” Standard.
The Frame is Glazed with 2mm Float Glass. The backboard is 3mm FSC certified MDF held in with Flexi-tabs. D-Rings, Screws and Picture Cord are supplied.
Print & Fit:
If you choose this option, we will ask you to supply a digital image file of sufficient quality (minimum 3333px x 2335px) to print at A3 - once you have an order number, you will be able to send it by email, dropbox, wetransfer etc..
We will then print this image out on Canon Semi Gloss 240gsm. FSC® Certified Photo-Paper, using our state of the art Canon imagePROGRAF iPF8400 printer with it’s LUCIA EX 12 Colour Pigment Ink system. Once printed, we bond the printed image to the undermount to prevent any possibility of wrinkling.
After fitting your image into the frame, we seal the back of the frame with brown gum tape and fit the hangings and cord. The finished picture will arrive with you (or whoever you send it to) professionally finished and ready to hang on the wall.